Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Power Down an Airbox Container

The steps and information provided above are intended as general guidelines only. They are not a substitute for professional advice or service. We do not accept any responsibility or liability for any issues, damages, injuries, or losses that may result from following these steps. All electrical work should be performed by a qualified and licensed professional in accordance with local codes and safety regulations.

 

Power Down an Airbox Container

 

1) Turn off miner load following site preferences

 

2) Leave exhaust fans running for at least 10 minutes to fully cool down miners

 

3) Using HMI controller, turn fans off

If no HMI, turn off fan breakers


 

4) Turn off PDU Breakers

The off position is when you can see the Green 'Off'



5) Turn off main breaker in switchgear cabinet

Push the red button to turn off the main breaker

 

Container is now powered down. Always use multimeter to verify before working on any electrical components.